Sometimes, the problem isn’t the bulb—it’s the socket! If the socket’s contact point is bent down, the bulb won’t make a solid connection.
✅ How to Fix It:
- Turn off the lamp and unplug it for safety.
- Use a small screwdriver or tweezers to gently lift the center contact inside the socket.
- Plug the lamp back in and screw in the bulb securely.
🔥 Result: The bulb now makes full contact, and the lamp works again!
3. The “Reverse Flip” Trick for LED Bulbs That Stop Working 🔄💡
If your LED light bulb suddenly stops working, it may just need a small internal reset.
✅ How to Reset an LED Bulb:
- Turn the light switch on and off rapidly (3-5 times).
- Wait 10 seconds, then turn it on again.
- If that doesn’t work, unscrew the bulb, flip it upside down for 10 seconds, then screw it back in.
🔥 Result: Many LED bulbs will reset themselves and start working again!
4. If the Lamp Still Doesn’t Work… Try This Last Step 🛠️
If the bulb and socket both seem fine, the lamp switch or wiring might be the issue.
✅ Check the Switch:
- If the lamp has a rotary or push switch, turn it on/off multiple times to loosen any dust buildup.
- For lamps with cord switches, wiggle the cord slightly while turning it on to check for a loose wire.
✅ Check the Power Source:
- Plug the lamp into a different outlet to rule out an issue with the socket.
- If the lamp works in another plug, the original outlet may need resetting (especially in kitchens and bathrooms with GFCI outlets).
Final Thoughts
Before spending money on new bulbs or repairs, try these quick electrician-approved tricks to bring your lamp back to life in just 1 minute! Many times, it’s just a simple fix—and you’ll be saving money instantly.
💡 Try it now and see if your « burnt-out » bulb starts working again! 🔥😃
